BYD Seal 6 DM-i Comfort (19 kWh)
2024 • Sedan
Electric Range
105
kmBattery Capacity
19
kWhPower Output
218
HPReal-World Range Estimates (EV-Database Benchmark)
Physical range calculations based on seasonal ambient temperatures, cabin HVAC load, and highway cruising aerodynamics.
Freezing cell electrolyte drag & cabin heating HVAC load
Optimal cell chemistry temperature & max city regeneration
High-speed aerodynamic drag & continuous inverter draw
Range Simulator
Test real-world electric range across seasonal temperatures, climate control, and highway share.
Euro 6e-bis & Tax Simulator
Calculate Benefit-in-Kind (BiK), Germany 0.5% Dienstwagen tax, France Malus, and 2026/2027 fleet savings.
Safety Rating
Tested year 2022: Adult (92%), Child (83%).
BYD Seal 6 DM-i Comfort (19 kWh) (2024): Powertrain & Real-World Utility
The BYD Seal 6 DM-i Comfort (19 kWh) (2024) is engineered with a 19 kWh gross (16.8 kWh usable) traction battery, delivering an official homologated WLTP electric range of 105 km. In real-world European driving conditions, drivers should anticipate approximately ~97 km in mild urban commuting, tapering down to around ~67 km during sub-zero motorway driving (130 km/h) due to cabin HVAC heating and aerodynamic drag. Replenishing the battery takes approximately ~1.6 hours via an 11 kW AC Wallbox (or ~8 hours from a standard 2.3 kW domestic socket).
Test This Vehicle on a Real Route
Calculate how ambient winter temperature, 130 km/h highway speeds, terrain elevation, and cabin heating impact the BYD Seal 6 DM-i Comfort (19 kWh)'s battery in real time.
Battery Pack vs Market
19 kWh gross
With 19 kWh storage (16.8 kWh net), the battery packaging is optimized to balance electric range with reduced vehicle curb weight, preserving luggage space and internal agility.
Real-World Range Expectation
While official WLTP laboratory figures state 105 km, drivers should anticipate approximately ~97 km in temperate urban commutes, and around ~67 km during sub-zero motorway trips with cabin heating.
Charging Infrastructure
11 kW AC Onboard
A standard 11/22 kW home wallbox will replenish the pack in approximately ~1.6 hours. Fast DC charging is not equipped on this model, meaning charging is best suited for overnight domestic wallboxes or workplace destination chargers.
| Specification | Official Homologated Value | European Segment Context |
|---|---|---|
| WLTP Electric Range | 105 km | Exceptional (100+ km) |
| Battery Capacity | 19 kWh gross (16.8 kWh net) | Above European Market Average |
| Total System Power | 218 HP | Balanced Daily Performance |
| Charging Capabilities | 11 kW AC (AC Only) | Domestic / Workplace AC |
| CO₂ Emissions & Fuel Consumption | 30 g/km • 0.8 L/100km | Euro 6e-bis Compliant |
Daily Commute & Efficiency Verdict: For European motorists with typical round-trip daily commutes of ~30–40 km, the BYD Seal 6 DM-i Comfort (19 kWh)'s 105 km electric range can comfortably cover ~3.1 days of routine driving on pure electricity before triggering the combustion engine.
Euro 6e-bis & Corporate Fleet Impact: With an official rating of 30 g/km CO₂ and 0.8 L/100km fuel consumption, this vehicle benefits from competitive tax brackets across major European markets. Under revised 2026/2027 Euro 6e-bis Utility Factor calculations, high electric range models like this retain substantially lower Benefit-in-Kind (BiK) and company car tax liabilities compared to older generation PHEVs.
Euro 6e-bis & Company Car (BiK) Tax Impact
With 105 km electric range and 30 g/km CO₂, this model qualifies for an estimated UK BiK rate of 5% (Low). Its high electric range cushions against upcoming EU Utility Factor calculation increases.
✓ Data verified from official manufacturer WLTP test sheets, European regulatory filings, and Euro NCAP crash databases.
Updated: October 2026 • Verified by PHEVs.eu Technical TeamCharging Architecture & Electrical Ports
AC home wallbox charging curves and public DC rapid charging capabilities.
On-Board Charger (AC)
DC Rapid Charging (CCS)
BATTERY
Hybrid Powertrain & Battery Engineering
Transmission integration, pure-EV speed boundaries, and cell thermal management.
P1+P3 DHT (Dedicated Hybrid Transmission — Series/Parallel)
Above this speed, the petrol ICE starts automatically to assist propulsion even with 100% SoC.
LFP (Lithium Iron Phosphate)
blade
LFP cells have a flat voltage discharge curve. Charging to 100% via AC once weekly is recommended for BMS cell balancing.
Cuts winter cabin HVAC draw by ~60%, preserving sub-zero electric driving range.
Provides bidirectional 230V AC power for camping equipment, power tools, or emergency domestic appliances.
General
Electric Performance
Engine & Performance
Comfort & Space
Key Technical Specifications — BYD Seal 6 DM-i Comfort (19 kWh) (2024)
Official manufacturer and WLTP homologated technical data sheet for BYD Seal 6 DM-i Comfort (19 kWh) plug-in hybrid.
| Specification Parameter | Official Value |
|---|---|
| Vehicle Model | BYD Seal 6 DM-i Comfort (19 kWh) |
| WLTP Electric Range | 105 km |
| Battery Capacity | 19 kWh (Net: 16.8 kWh) |
| WLTP Fuel Consumption | 0.8 L / 100 km |
| CO₂ Emissions | 30 g / km |
| System Power Output | 218 HP (163 kW) |
| Combustion Engine | 1.5 L |
| Electric Motor Output | 200 HP (149 kW) |
| Hybrid Powertrain Architecture | P1+P3 DHT (Dedicated Hybrid Transmission — Series/Parallel) |
| Pure EV Speed Ceiling | 130 km/h |
| AC Charging | 11 kW (3-Phase, ~3 h) |
| DC Fast Charging | Yes (18 kW, 30–80% in ~35 min) |
| Vehicle-to-Load (V2L) | Supported (230V / 3.3 kW) |
| Thermal Management | Heat Pump Standard (COP ~2.5 - 3.0) |
| Seating Capacity | 5 Seats |
| Luggage / Boot Capacity | 500 L (Max: 500 L) |
| Dimensions (L × W × H) | 4775 × 1890 × 1670 mm |
| Curb Weight | 1805 kg |
| Euro NCAP Safety | ★★★★★ (5 Stars) |
| Manufacturer Warranty | 3 Years |
Launch Real-World Route Simulator with
Pre-configured with battery capacity, hybrid reserve threshold, and powertrain drag aerodynamics.